Instruction Manual

8─39
Baud Rate
1. COM1 (GPS)
4800bps
2. COM2 (PC)
4800bps
384000bp
0. EXIT
3. COM3 (NAV1)
4800bps
4. COM4 (NAV2)
5. COM5 (COMPASS)
4800bps
1. 1200bps
2. 4800bps
3. 38400bps
COM Port Setting
External sensor signals are to be entered to this radar via a COM port. This radar has five COM ports. Input
of signals from sensors or output of signals to sensors needs to adjust the COM port in accordance with the
sensors.
[I] Baud Rate Setting
Set the baud rate of the signal to be entered into the COM port.
Procedures 1 Open the Equipment Setup Menu.
2 Press [5] key.
The COM Port Setting Menu will appear.
3 Press [1] key.
The Baud Rate Setting Menu will appear.
4 Select the port number you want to set,
pressing the numeric keys [1] to [5].
The Baud Rate Selection menu will appear.
5 In the selection menu, select the baud
rate you want to set, pressing the
numeric key.
Selection value
1. COM1 (GPS): 1200/4800/*38400 bps
2. COM2 (PC): 1200/4800/
38400/115200 bps
3. COM3 (NAV1): 1200/4800/38400 bps
4. COM4 (NAV2): 1200/4800/*38400 bps
5. COM5 (COMPASS): 4800/38400 bps
* If COM1/COM4 is set to 38400 bps, signals
can only be transmitted. The baud rate for reception can be set to up to 4800 bps.
COM5 can be used for receive port only. It is dedicated for COMPASS signal. This
means that the port is unavailable for other signals.
The GPS, PC, NAV1, NAV2, COMPASS in the parentheses are the standard ports
connecting to the external sensors.
Exit 1 Press [RADAR MENU] key.
The Main Menu will reappear.