Manual

3-43
ALL SHIP’S DIST
−
RELAY
Dist-address
：
XXXXXXXXX
Nature
：
UNDESIGNATED DIST
Dist-position
：
12
ﾟ
34’N123
ﾟ
45’E
Dist-UTC
：
01:20
Dist-telecomm
：
J3E TEL
Call TX/RX freq
：
2,187.5 / 2,187.5 kHz
Use and to
scroll the screen.
Procedure
Example: Procedure of a distress relay call to all ships
1. From the "MENU#1-EDIT&CALL" screen, press , and then press .
The "DISTRESS RELAY CALL" screen is displayed.
1. Select 1 to relay the call to all ships and coastal stations.
2. Select 2 to relay the call to an individual ship or coastal station.
2. Press . and then press .
The "ALL SHIPS DIST-RELAY" screen is displayed.
The following items have been set in this example.
｢Dist-address｣
：
XXXXXXXXX
｢Nature｣：UNDESIGNATED DIST
｢Dist-position｣：12
ﾟ
34’N123
ﾟ
45’E
｢Dist-UTC｣
：
01:20
｢Dist-telecomm｣
：
J3E TEL
｢Call TX/RX freq｣
：
2,187.5/2,187.5 kHz
●
Entering the respective items:
After selecting each item, press to confirm the selection.
(1) Dist-address: Use the numerical keys ( to ) to enter the address of the receiving
station (ship or coastal station).
(2) Nature
Dist-telecomm: Use the and keys to select the items.
(3) Dist-position: Use the and keys to determine the direction, and then input
the
ship's position using the numerical keys ( to ).
(4) Dist-UTC: Use the numerical keys ( to ) to enter the time.
(4) Call TX/RX freq: Use the and keys to select one of the preset frequencies, or use
the numerical keys ( to ,and ) to specify a frequency directly.
4
ENT
ENT
0 9
0 9
DISTRESS RELAY CALL Select no.__
1.ALL SHIP’S DIST rly EDIT
2.INDIVIDUAL DIST rly EDIT
1
ENT
0 9
▲
▼
Note
0 9 .