User's Manual

6
ENGLISH
JABRA SUPREME
Pair new
device
PAIRING IT WITH YOUR PHONE/DEVICE
Bluetooth® Headsets are connected to mobile phones/devices
using a procedure called ‘pairing’. By following a few simple steps, a
phone/device can be paired with a headset in a matter of seconds.
1 Activate Bluetooth® on your phone/device
2 Turn the Jabra SUPREME on
3 The rst time you turn the Jabra SUPREME on it will
automatically enter into pairing mode. The connectivity icon
on the Status Display will ash with a blue light and you will be
voice guided through the pairing process.
If you have disabled the Voice guidance go to the Bluetooth
settings menu on your phone/device and search for new
Bluetooth devices. Choose Jabra SUPREME. When pairing is
complete Status Display will shft from ashing to steady light.
You are now ready to start using your Jabra SUPREME.
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
PAIR A NEW OR SECOND DEVICE
1 Ensure that the Jabra SUPREME is turned on
2 Tap the Voice button. You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
rst device afterwards