User Manual

IS123-17B
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Page 3/4
Motor Flag
Maximum 60º angle
Do NOT operate the fan with the motor mounted in a vertical orientation, or
at any angle larger than 60º from horizontal as shown above. Mounting the
fan this way will void the warranty.
Do NOT operate fan with the motor mounted at an angle larger than 60º
from horizontal. This will void the warranty.
Do NOT mount fan with the motor flag mount pointed upward as shown
below. This can cause moisture to build up in the capacitor cap and motor
housing and cause a short. Mounting the fan this way will void the warranty.
Do NOT mount bracket horizontally. The included bracket was not designed
to be mounted this way and cannot withstand the structural stress caused
by the weight and movement of the fan. Mounting the bracket and fan this
way will void the warranty.
J&D Manufacturing has a wide variety of horizontal brackets and
additional options for mounting. Contact J&D or call your J&D dealer
for more information.
ADDITIONAL CLARIFICATIONS AND WARNINGS