SDS

ManualsBrandsJ-B Weld ManualsConstruction Adhesive13 mil Red Perma-Lock (Case of 6)

Safety Data Sheet

According to OSHA Hazard Communication Standard, 29 CFR 1910.1200

Initial preparation date: 04.04.2019 Page 1 of 10

High Strength Threadlocker

Generated using Total SDS™ (patent-pending), www.GSMSDS.com

SECTION 1: Identiﬁcation

Product identiﬁer

Product name: High Strength Threadlocker

Product code: 27106, 27113, 27136

Recommended use of the product and restriction on use

Relevant identiﬁed uses: Anaerobic Sealant

Uses advised against: Not determined or not applicable.

Reasons why uses advised against: Not determined or not applicable.

Manufacturer or supplier details

Manufacturer:

United States

J-B Weld Company, LLC

400 CMH Road

Sulphur Springs, TX 75482

903-885-7696

info@jbweld.com

Emergency telephone number:

United States

CHEMTREC

Transportation Emergencies (24 hour): 800-424-9300 or

703-527-3887

Poison Control Centers (24 hour): medical emergencies 800-222-1222

SECTION 2: Hazard(s) identiﬁcation

GHS classiﬁcation:

Eye irritation, category 2A

Speciﬁc target organ toxicity - single exposure, category 3, respiratory irritation

Label elements

Hazard pictograms:

Signal word: Warning

Hazard statements:

H319 Causes serious eye irritation.

H335 May cause respiratory irritation.

Precautionary statements:

P264 Wash hands thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P271 Use only outdoors or in a well-ventilated area.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists get medical advice/attention

Summary of content (10 pages)

PAGE 1
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 1 of 10 High Strength Threadlocker SECTION 1: Identiﬁcation Product identiﬁer Product name: High Strength Threadlocker Product code: 27106, 27113, 27136 Recommended use of the product and restriction on use Relevant identiﬁed uses: Anaerobic Sealant Uses advised against: Not determined or not applicable. Reasons why uses advised against: Not determined or not applicable.
PAGE 2
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 2 of 10 High Strength Threadlocker P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P405 Store locked up. P403+P233 Store in a well ventilated place. Keep container tightly closed. P501 Dispose of contents/container in accordance with local regulations.
PAGE 3
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 3 of 10 High Strength Threadlocker Causes eye and respiratory irritation. Symptoms include redness, itching, tearing, cough, and diﬃculty breathing Delayed symptoms and eﬀects: Not determined or not applicable. Immediate medical attention and special treatment Speciﬁc treatment: Not determined or not applicable. Notes for the doctor: Not determined or not applicable.
PAGE 4
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 4 of 10 High Strength Threadlocker Use only with adequate ventilation. Avoid breathing mist or vapor. Do not eat, drink, smoke or use personal products when handling chemical substances. Wear recommended personal protective equipment (see Section 8). Conditions for safe storage, including any incompatibilities: For safe storage, store at or below 38 °C (100.
PAGE 5
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 5 of 10 High Strength Threadlocker Appearance Red liquid Odor Mild Odor threshold Not determined or not available. pH Not determined or not available. Melting point/freezing point Not determined or not available. Initial boiling point/range > 148.9 °C (> 300°F) Flash point (closed cup) > 93.3 °C (> 199.
PAGE 6
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 High Strength Threadlocker Product data: No data available. Substance data: Name Route Result Cumene hydroperoxide inhalation LC50 - Mouse: 200 ppm (4 hours) oral LD50 - Rat: 382 mg/kg dermal LD50 - Rat: 500 mg/kg Skin corrosion/irritation Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available.
PAGE 7
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 7 of 10 High Strength Threadlocker Product data: No data available. Substance data: Name Result Cumene Component aﬀects the respiratory system. Speciﬁc target organ toxicity (repeated exposure) Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available.
PAGE 8
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 8 of 10 High Strength Threadlocker Product data: No data available. Substance data: No data available. Other adverse eﬀects: No data available.
PAGE 9
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 9 of 10 High Strength Threadlocker SARA Section 302 extremely hazardous substances: None of the ingredients are listed.
PAGE 10
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 04.04.2019 Page 10 of 10 High Strength Threadlocker Abbreviations and Acronyms: None Disclaimer: This product has been classiﬁed in accordance with OSHA HCS 2012 guidelines. The information provided in this SDS is correct, to the best of our knowledge, based on information available.