Instruction Manual

Preparation of Espresso with Nespresso®* capsule

*Τrademark of a third party, not related to (NEW) H, BENRUBI & FILS S.A.

Make sure the steam regulator (6) is in the “ ” position before plugging in the appliance.

1. Remove the water tank (10) by pulling it upwards and filling it with water. Make sure the water

in the water tank is not less than "MIN" and does not exceed "MAX" indication.

• Use cold water. We recommend using filtered water as it reduces limescale and prolongs

the life of your coffee maker. Never use ware or frizzy water.

2. Place the water tank (10) in place until it snaps firmly into the base of the appliance.

3. Connect the plug into the socket.

4. Insert the capsule of your choice into the Nespresso®*(21) capsule holder (see photo) and

close the cap (20).

5. Insert the holder (21) into the group (19).

Note: To insert the holder (21) into the group (19), make sure that the arrow on the lid (20)

is aligned with the group notch (19). Turn the capsule holder (21) to lock in its place.

6. Place the group (19) by turning clockwise. Ensure that it snaps firmly to the “ ” position.

7. Press the coffee ON/OFF button (1) to prepare the appliance. The indicator light will turn on

and both indication lights of one-cup (2) and two-cup (3) buttons will flash until the appliance is

warm and is ready.

8. When the indicator lights stop flashing, place a cup on the detachable rack (13).

9. Press the one-cup coffee button (2) or two-cup coffee button (3). The indication light of the

selected button will flash.

10. When the desired amount of water is running, the appliance will stop, and the indication

lights will remain on.

Note: If you want to stop the procedure before it is completed, press the one-cup (2) or

two-cup (3) button once.

11. When you are finished, press the ON/OFF button (1) and remove the plug from the socket.

12. Remove the group (19) by turning it counterclockwise and allow to cool before removing the

capsule.

13. Once the group (19) and the holder (21) have cooled, remove the holder (21) by aligning the

arrow with the notch of the group (19). Open the lid (20) of the holder (21) and remove the

capsule.

14. After each use, empty the water tank and wash the handle/filter holder and filter. See "Care

and cleaning".

Notes:

• Do not leave the coffee maker unattended while it is operating.

• If the appliance remains on without operation, it will turn off automatically after 25

minutes.