Use and Care Manual

Pay special attention when cleaning transition areas where oors and walls meet, as well as areas
exposed to more spills or messes, such as the walls behind kitchen appliances.
Sealing stone and marble tile
• All natural stone and marble tiles require a sealer, and in most cases, you will need to use a
pre-sealer or grout release before grouting.
• Prolonged exposure to water can affect the wear and look of natural stone and marble tiles.
• To avoid damage, test all cleaners, sealers, and cleaning tools (such as scrub brushes) on the
tile before use.
Stains and scratches
Different stains or contaminants may require different cleaners. For example, a cleaner with a
neutral pH is good for removing grease and oils. For soap scum, hard water deposits, or mildew,
use a gentle all-purpose spray cleaner or a cleanser intended for stone and marble tiles.
We recommend the Laticrete Heavy Duty KlenzAll™ Cleaner Concentrate for Natural Stone, Tile,
& Grout to remove tough dirt, grease, and grime. If you choose to use a harsher or more acidic
cleaner for stubborn stains, be careful it doesn’t touch adjacent materials. Test harsher cleaning
materials in an inconspicuous spot to ensure they won’t cause damage.
After applying the cleaning product, scrub, then let the product sit to work as directed. Remove
the product with a damp sponge and rinse thoroughly before drying. Even sealed tiles should be
cleaned immediately after a spill.
It is best to avoid using permanent inks or dyes near your natural stone and marble tiles. If ink or
dyes do come into contact with your tiles, immediately rinse with water, using a cleaning product
that is safe for natural stone and marble tiles.