Installation Guide
caulking sealant must be installed in all corner joints in place of grout.
• Keep the project area clean. Even the lightest dust could permanently
stain any uncured grout joints.
• Use the right grout for your specic installation:
• Standard polymer-modied grout
• High-performance cement grout
• Premixed grout
• Epoxy Grout
9. CLEANING AND SEALING
Keeping an installation looking new is not as difcult as you may think.
Many tiles are naturally porous, so a quality sealer should keep your in-
stallation protected. How often you need to reapply will depend on the
amount of trafc in the area. Regular cleaning of the area with a neutral
pH non-acidic cleaner should do the job. There are more harsh cleaners
available if needed. Follow all manufacturer’s
instructions carefully and always test in a non-
visible area before applying to the entire area.