Installation & Assembly

STEP 1
Begin assembly by attaching each Plastic Foot (H) to the end side of the bottom of Footboard (G) by
using 2 Pan Head Screws (B) & 2 Small Flat Washers (C) per side. See Figure 1. Tighten screws using
philips head screwdriver (*not included).
STEP 2
Next attach each Side Rail (I) to the Headboard Set (F) using 2 Short Allen Bolts (A) per side. Then
attach Side Rails (I) to the Footboard (G) 2 Short Allen Bolts (A) per side. Tighten all bolts with Large
Allen Wrench (E) provided.
STEP 3
Finally attach each Slat (J) to the Side Rails (I) using 1
Wood Screw (D) per side. The assembly is complete.
AA
A
A
A
A
A
E
D
D
D
I
I
F
G
J
J
J
J
J
Page 1 of 1
QTYPART
8A
4C
HARDWARE QTYPART HARDWARE
4
B
10D
1E
H
H
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HARDWARE LIST
A (8) Short Allen Bolts M8 x 25mm
B (4) Pan Head Screws 45mm
C (4) Small Flat Washers
D (10) Wood Screws 32mm
E (1) Large Allen Wrench
PARTS LIST
F (1) Headboard Set
G (1) Footboard
H (2) Plastic Feet
I (2) Side Rails
J (5) Slats
H
C
C
B
B
FIGURE 1
G
BED SET
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
This product is designed for residential use only.
Color: Matt Black, Matt White, Dark Brown, Pink, Linen Stone, Grey
Twin - Full