Assembly Instructions

Hardware kit
No
Description
A
B
C
D
E
F
G
H
I
J
Qty
Hex nut M8
Lock washer Ø8
Flat washer Ø8 x 16mm
Long bolt-Attaching Leg Extension 5/6" x 180mm
Medium bolt Attaching Leg M6 x 60mm
Short bolt Attaching Top/Bottom Panel M6 x 30mm
Allen key K4
Key wrench 13
Wooden Screw Ø4 x 25mm
Wooden Dowel Ø10 x 20mm
Page : 1/2
Step 1
Lay the top of the Storage Box upside down on a clean padded
surface to prevent scratching. Insert the Wood Dowels (J) into
the Vertical Panel ends.
Attach the two Storage Box Vertical Panels to the top shelf
using a Short Bolt (F), a Lock Washer (B) and a Flat Washer
(C) using the Allen key provided.
Attach the Middle Shelf to the Vertical Panels using the four
Wood Screws (I).
Attach the bottom of the Storage Box to the Vertical Partitions using
a Short Bolt (F), a Lock Washer (B) and a Flat Washer (C).
Slide the Side Panels into the grooves on the Top and Bottom Panels
as show in the diagram.
Step 2
Step 3
Carefully lay the Shelf Unit on the side and attach
a Right Side Leg and a Left Side Leg to the top
corners using a Bolt (E), a Lock Washer (B) and
a flat Washer (C). Diagram 4 Note that the
groove in the leg will be on the inside of the unit.
Repeat for the other side. Make sure all bolts are
securely tightened.
4 pcs
28 pcs
28 pcs
8 pcs
8 pcs
8 pcs
1 pc
1 pc
6 pcs
8 pcs
8
11
11
2 x
F
B
C
G
I
4 x
12
5
12
2 x
F
B
C
G
J
6
J
8 x
5
12
7
8 x
E
B
C
G
8
9
8
15
9
MADE IN VIET NAM
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
HIGH/LOWRECT TABLE