User's Manual

TDC-0951-001 100W-R and 100WP-R Datalogging Water Endpoint Installation Guide 10
Proprietary and Confidential
Install the 100W-R and 100WP-R endpoints using one of the following mounting options:
100W-R and 100WP-R endpoints Mounting Options
Pipe Mount
The endpoint mounts to a pipe near the meter (see Pipe Mount Installation). This
option requires the Remote Mount Kit and the appropriate Pipe Mount Kit.
Remote Mount
The endpoint mounts to a flat surface and connects to the meter register with a
cable up to 300 feet (see Remote Mount Installation). This option requires the
Remote Mount Kit.
Direct Meter Register
Mount
The endpoint mounts directly to a meter register designed for endpoint direct
mounting. This installation does not require a mounting kit (see Direct-Mounting
to the Meter Register).
100W-R and 100WP-R Endpoints Accessories
100W-R/100WP-R Mounting Accessories
Accessory
Part Number
Remote Mount Kit (Encoder/Pulser only)
CFG-0771-021
Remote Mount Kit (Encoder/Pulser with Leak Sensor)
CFG-1300-003
Pipe Mount Kit
pipes from 3/4 to 1 3/4 inches
pipes from 1 5/16 to 2 1/4 inches
pipes up to 4 inches
CFG-0217-503
CFG-0217-504
CFG-0217-501
Direct Mount Screw Pack
Bulk
80 per bag
122 per bag
SCR-0010-005
SCR-0010-004
SCR-0010-001
Attaching the Backplate
Select the appropriate remote mount kit for your 100W endpoint (see 100W-R and 100WP-R Accessories on
page 10). Attach the 100W endpoint's backplate before completing a Remote Mount or Pipe Mount
installation.
C H A P T E R 4
Installing the 100W-R and 100WP-R Endpoints