User's Manual
Itron Meter Installation
2. Use the replacement mounting screws shipped with the 100G. Install module-to-meter mounting screws in
an alternating pattern.
• Insert the right module mounting screw and tighten the screw enough to hold it in place. Do not
completely tighten the screw.
• Install the lower left module mounting screw and tighten two turns.
• Insert the lower right mounting screw and tighten two turns.
• Insert the upper left mounting screw and tighten to snug.
• Tighten the mounting screws in an alternating diagonal fashion as shown in the photo below.
Tighten each mounting screw evenly.
Important Meter manufacturers: torque the mounting screws 15 to 20 inch-pounds.
TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 47
Proprietary and Confidential