User's Manual

This chapter provides the instructions to install the ERT module on an Itron meter.

Note Itron meters are also known as Actaris, Schlumberger, or Sprague meters. For these

instructions, all meters will be referred to as Itron meters.

Removing the Meter Index

Begin the module installation by removing the index cover and index from the meter.

To remove the index from the meter

1. Remove the index cover screws and the index cover from the Itron meter. Examine the mounting screws.

If they are 5/8-inch long and not corroded, keep them to re-attach the 100G assembly. If the screws are not

the correct length or if the screws are corroded, discard them.

Note Use the removed index cover as a temporary storage container for the screws. Properly dispose all

unused screws, old index covers, gaskets, tamper seals, and other leftover materials.

C HAPTER 4

tron Meter Installation

TDC-0823-014 100G Series Gas ERT Module Installation Guide, Direct Mount 31

Proprietary and Confidential