User's Manual

independently. When the siren turns on with master Transmitter, for example, the siren turns off if
pressing toggle red button of slave Transmitter once.
13. When the distance between the Base and Transmitter is within the coverage range, In-Use LED
stays on, but if the distance is out of the area, In-Use LED blinks and out-of-range beep sound is
heard. There is beep on/off switch on the left side of Transmitter to mute the beep tone.
14. There are two microphones on a Transmitter. One is Internal Mic and the other is External.
Basically Transmitter operates with Internal Mic, but when External Mic is plugged in the Jack on
the top of Transmitter, Internal Mic switches off and External Mic switches on. When External Mic
is removed or damaged, Internal Mic switches on automatically.
TROUBLE SHOOTING
SYMTPOM SOLUTION
No recording sign
♦ Check for the line cord connectors at both ends that they are pushed in firmly until they
click.(docking & recorder)
♦ IF you had a power failure or had unplugged the docking station, replace the transmitter
on the docking station for two to five seconds to reset the system.
No power on the
transmitter unit
♦ Check the Ni-MH battery pack connection inside the battery compartment on the
transmitter.
♦ The transmitter rechargeable Li-ion battery pack may need to be charged.
Does not charge
♦ Make sure the charging contacts on both the docking station and the transmitter are in
contact during charging.
♦ The charging contacts may need to be cleaned with an alcohol-moistened cloth.
♦ The Ni-MH battery pack may need to be discharged first before a full charge.
Range is limited
♦ Raise or reposition the antenna on the docking station.
Sign received flutters or
fades
♦ The transmitter rechargeable Li-ion battery pack may need charging.
♦ You may be out of normal operating range. Move closer to the docking station.