Product Manual

Page 8 of 11
8. If the linear actuator fails to meet any of these conditions, repeat steps 2 to 4.
9. The entire installation is complete only if steps 1 to 6 are executed successfully.
Operating Instructions
Confirm that set-up matches the following image:
Maintenance
Maintain the linear actuator by adopting a program of conscientious repair and maintenance in
accordance with the following recommended procedures. It is recommended that the general
condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry,
clean, and free from oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
Make sure the surface of the actuator is free of bumps
and smudges.
After the first 20 operating hours
After the first 50 operating hours or
every week