Product Manual
Table Of Contents
Page 9 of 18
Air Supply
WARNING: Operating the tool at pressures over the rated capacity may cause
severe damage and/or personal injury. Do not exceed 90 PSI while operating the tool. Do not
use an accessory rated at a lower maximum pressure than the tool itself.
CAUTION: The air supply must be clean while operating the tool. Unclean air will
cause excessive wear, shorten the life of the tool, and may cause damage and/or personal
injury.
The illustration above shows an optimal setup that includes an inline filter, regulator, and oiler.
• Make sure that the air valve (or trigger) is in the OFF position before connecting to the air
supply.
• Do not exceed an air pressure of 90 PSI.
• Drain the air tank daily. Water in the air line can damage the tool.
• Clean the air inlet filter weekly.
• Keep the hose away from heat, oil, and sharp objects. Check the hose for wear and make
certain that all connections are secure before every use.