Specification
Specifications | February 2015
Product Model Numbers
Ironing Centers: IAW-42
Dimensions (Actual Size)
Overall height: 51”
Overall width: 14 1/2”
Overall depth including door: 3 3/4”
Dimension from wall to outer
Edge of frame (when recessed): Flush
Penetration into opening: 3”
Rough opening height: 51”
Rough opening width: 14 1/2”
Wall opening depth: 3 7/8”
Additional Information
• Unit may be surface mounted (extends into
the room 3 3/4”) or can be recessed (door
only extends into room for a flush mount) into
any wall with standard 16” center studs.
• See table bottom right to determine desired
ironing board height above the floor.
• Unit can be provided with a left piano hinge
door upon request. Right hinge is standard.
For flush mount special hinges are required.
• Comes standard with wood veneer door.
• Recessed mounting - Recommended to
attach 2” x 4” cleat to studs, level with the
bottom of opening (for support.)
• Door opens approximately 180°. Allow at
least 16” to the side of the unit for door to
swing open.
• Options include: flat white door, no door,
sleeveboard, special hinges (recess
applications), and iron.
See Page 2 for additional information
Ironing Board Height
Surface Mount
or
Recessed
Cut Opening Board
Above floor Height
28” 35”
27” 34”
26” 33”
25” 32”
24” 31”
23” 30”
22” 29”