Warranty

ManualsBrandsIPT Sink Company ManualsBath18.25 in. Drop-In Top Mount Oval Ceramic Sink Basin in White with Overflow Drain

PAGE 1

Before You Start

• IPT Sink Company recommends that all ceramic sinks be installed by an experienced, professional installer.

• IMPORTANT: The enclosed cutout template is only for reference. It is recommended that you discuss with

your installer and agree that the finished appearance is the desired effect. IPT Sink Company is not

responsible for improper sink or countertop installations.

• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure of this step can lead to

product damage.

• IPT Sink Company ceramic sinks should only be fastened to a solid surface countertop (i.e. granite, Corian®

or Silestone®).

• IPT Sink Company is not responsible for sink or countertop if damaged during installation. Be sure to inspect

the sink for damage prior to beginning installation.

• Follow all local plumbing and building codes.

Recommended Tools & Materials (Not Included)

Oval Vanity Sink

Top Mount Porcelain Sink

Installation Instructions

Rectangular Vanity Sink Rectangular Vanity Sink

Summary of content (4 pages)

PAGE 1
Top Mount Porcelain Sink Installation Instructions Oval Vanity Sink Rectangular Vanity Sink Rectangular Vanity Sink Before You Start • IPT Sink Company recommends that all ceramic sinks be installed by an experienced, professional installer. • IMPORTANT: The enclosed cutout template is only for reference. It is recommended that you discuss with your installer and agree that the finished appearance is the desired effect. IPT Sink Company is not responsible for improper sink or countertop installations.
PAGE 2
Top Mount Porcelain Sink Installation Instructions 1. Unpack the new sink and check the contents of the materials supplied: sink, and cutout template. 2. Place the sink upside down in desired position on the countertop and trace completely around the edge of the sink. 3. Use the cutout template as reference. Position it to the proper place that in between the sink edge line and trace around the edge of the template. 4. Drill a pilot hole in all four corners of the inside line.
PAGE 3
Top Mount Porcelain Sink Care and Maintenance SUGGESTED MAINTENANCE • Wash your sink using warm water, a non-abrasive liquid cleaner or detergent and a soft cloth or non-abrasive woven nylon pad. Your sink may be cleaned as often as it is used. • For daily cleaning, a warm water soaked sponge with mild soap followed by warm water rinse is recommended. Drying the sink afterwards with a soft cloth or towel will help to eliminate water spots and maintain shine.
PAGE 4
Limited 1-Year Warranty This product has been manufactured and tested to the highest quality standards by IPT Sink Company. We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty applies to the original purchaser for the original installation only.