- IOGEAR Wireless Audio / Video Kit Installation Guide
44
45
Advanced Settings – Video Mode Conguration
Note: If no output is seen on the monitor connected
to the Wireless VGA Receiver, it may be in a mode
which cannot be displayed by the monitor. This
can happen if the monitor is not adjusted to the
mode supported by the Wireless VGA Receiver.
Please refer to the operating instructions supplied
with your display and try adjusting the resolution of
the primary display until an image is shown.
By default, the installation will set the best resolu-
tion supported for your computer and extend your
screen to the right.
There are two options to adjust the resolution,
color quality, screen rotation, and between ex-
tended or mirror mode.
1. On the Monitor icon in the system tray to access
the menu.
2. Go through Control Panel, double click on “Dis-
play”, then choose “Settings” tab.
In this user manual, we will show you how to
access the advanced setting feature by double
clicking on the Monitor icon in the system tray.