MSDS

Page 3 of 10
MATERIAL SAFETY DATA SHEET
WORKING COPY
Supplier MSDS
Date Issued: 03/28/2010
MSDS No: Anti Slip
InvisaTread™ Anti-Slip Solution
irritation occurs, seek medical advice. Wash contaminated clothing and shoes before reuse.
INGESTION: Wash out mouth with water, keep at rest. Place person on left side with head down. Seek
medical attention. Do NOT induce vomiting unless directed to do so by medical personnel.
INHALATION: Remove from further exposure. Keep warm and at rest. If cough or other symptoms
develop, seek medical attention.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: Not Available
FLAMMABLE LIMITS: NA = Not Applicable
AUTOIGNITION TEMPERATURE: Not Applicable
FLAMMABLE CLASS: Nonflammable
FLAME PROPAGATION OR BURNING RATE OF SOLIDS: Not Applicable
GENERAL HAZARD: Evacuate personnel downwind of fire to avoid inhalation of irritating and/or harmful
fumes and smoke.
HAZARDOUS COMBUSTION PRODUCTS: Oxides of carbon
FIRE FIGHTING PROCEDURES: This product is a nonflammable substance. However, hazardous
decomposition and combustion products may be formed in a fire situation. Cool exposed containers with
water spray to prevent overheating.
FIRE FIGHTING EQUIPMENT: Respiratory and eye protection are required for fire fighting personnel.
Full protective equipment (Bunker Gear) and self contained breathing apparatus (SCBA) should be used for
all indoor fires and any significant outdoor fires. For small outdoor fires, which may easily be
extinguished with a portable fire extinguisher, use of a SCBA may not be required.
SENSITIVE TO STATIC DISCHARGE: Not expected to be sensitive to static discharge.
SENSITIVITY TO IMPACT: Not expected to be sensitive to impact.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Construct temporary dikes of dirt, sand, or any appropriate readily available material to
prevent spreading of the material.
Wearing the appropriate personal protective equipment designated in Section 8, move the leaking
container to a containment area or rotate the container so that the opening is above the liquid level.
Neutralize with lime or other base, then absorb on diatomaceous earth or equivalent inert material.
Shovel up and dispose of at an appropriate waste disposal facility according to current applicable laws and
regulations ,and product characteristics at time of disposal.