User's Manual

XCRF-860 USER’S MANUAL
29
Fig. 6.13 USB Driver Installation Step 4
Click “finish”. “Found New Hardware ready for use”
message will pop up on the bottom right of the PC screen. The
communication between the USB port and reader is established.
6.5 Operation Instructions on Demo Software
Select the communication port, click
, and a message of
“connection established” pops up on the screen. (Meanwhile,
the connection status lamb will turn green, and the type of
reader and the version information of baseband software display
on the title bar.)
Select “6C” as “the type of tags” in the choice box, to
perform the operations on ISO18000-6C compliant tags.
Select the number of antenna in use; “1” indicates that
antenna port 1 is connected to an antenna; “1# - 2#” indicates