Product Manual

Bariatric Trapeze 2 Part No 1106663
Assembling the Trapeze
NOTE:Forthisprocedure,refertoFIGURE 1.
NOTE:InvacarerecommendsthattwopeopleassembletheBariatricTrapeze.
 WARNING
The weight of the Bariatric Trapeze components are between 17 lbs (7.72 kg) and 21 lbs (9.53
kg). Use proper lifting techniques (lift with your legs) to avoid injury.
1. Removeshippingendcaps(yellow)fromA‐frame.
2. InsertthebaseassembliesintotheA‐frame.
3. Depressthesnapbuttonononebaseassemblyandslide
itintotheA‐frameuntilthesnapbuttonprotrudes
throughtheholeintheA‐frame.
NOTE:Thebaseassemblywilllockwhenanaudible
ʺclickʺis
heard.
4. RepeatSTEP 3fortheotherbaseassembly.
5. Slidethemastandboomtubeassemblyontothe
A‐frame,withtheboomtubeonthesamesideasthe
baseassemblylegs.
6. Loosentrapezeknobbyturningcounterclockwise.
7. Slidethetrapezeclampovertheendoftheboomtube.
8. Depress
thesnapbuttonontheboomtubeandslidethe
trapezeclampoverthesnapbutton.
9. Adjustthetrapeze.RefertoAdjustingtheTrapeze
on
page 2.
FIGURE 1 Assembling the Trapeze
Adjusting the Trapeze
 WARNING
Ensure that the trapeze clamp is securely tightened BEFORE using the trapeze, otherwise injury
may occur.
NOTE:Forthisprocedure,refertoFIGURE 2onpage 3.
Height
1. PositionthedesiredchainlinkontothefreeʺSʺhookonthetra pezeclamp(Detail ʺAʺ).
Position
1. Loosentrapezeknobbyturningcounterclockwise(Detail ʺAʺ).
2. Slidetheclamptodesiredpositionontheboomtube.
3. Securethetrapezeclamptotheboomtubebyturningtheknobclockwise.
Rotation
NOTE:Themastandboomtubecanberotatedtothreepositions.
Boom Tube
Assembly
Mast
Snap
Buttons
Base Assemblies
A-Frame
Base Assembly Legs
Trapeze
Clamp
Snap Button
Trapeze
Knob