Instructions / Assembly

ManualsBrandsIntex ManualsBoatingChallenger K1 Lake Kayak

(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018

93A

INTEX

OWNER’S MANUAL

INFLATABLE BOAT

IMPORTANT

THIS BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. READ IT THOROUGHLY BEFORE USING THIS

PRODUCT AND KEEP IT FOR FUTURE REFERENCE.

ISO-6185 BOAT

093-*A*-R0-1905

Due to a policy of continuous product improvement, Intex reserves the right to

change specications and appearance, which may result in updates to the

instruction manual, without notice.

Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans

certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/

Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex

Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long

Beach, CA 90801

• Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido

en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705

RR Roosendaal – The Netherlands

www.intexcorp.com

Summary of content (11 pages)

PAGE 1
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 93A ® INTEX OWNER’S MANUAL INFLATABLE BOAT IMPORTANT THIS BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. READ IT THOROUGHLY BEFORE USING THIS PRODUCT AND KEEP IT FOR FUTURE REFERENCE. ISO-6185 BOAT Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual, without notice. ©2018 Intex Marketing Ltd.
PAGE 2
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 TABLE OF CONTENTS INTRODUCTION...................................................................................................3 MANUFACTURE’S CERTIFICATION...................................................................3 SAFETY & WARNING...........................................................................................3 MANUFACTURER’S RECOMMENDATION..................................................
PAGE 3
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Introduction 93A This manual has been compiled to help you to operate your craft with safety and pleasure. It contains details of the craft, the equipment supplied or fitted, its systems, and information on its operation and maintenance. Please read it carefully, and familiarize yourself with the craft before using it.
PAGE 4
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Manufacturer’s Recommendation 93A The total number of persons, motor power and total weight shall not exceed the limits printed on the boat. Please refer to the boat's hull label for the actual values of your boat. See Table A. TABLE A MODEL ISO TYPE CHALLENGER 1 + bar (psi) Lbs kg I 264 120 1 CHALLENGER 2 / SET I 440 200 2 0 0.035(0.5) SEAHAWK 1 I 264 120 1 0 0.069(1.00) 0 0.035(0.
PAGE 5
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Description 93A Challenger Series and Explorer Pro Series 1 2 3 4 6 8 1 2 Challenger 1 and Explorer Pro 100 " 3 4 9 6 8 Challenger 2 / Set and Explorer Pro 200 / Set " - Recommended seating arrangement of the occupants. Seahawk Series 1 2 3 4 9 6 8 1 2 Explorer Pro 300 / Set " 3 4 5 6 7 Seahawk 1 " - Recommended seating arrangement of the occupants. NOTE: Drawings for illustration purpose only.
PAGE 6
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Inflating Instructions Before starting, locate a clean area free of stones or other sharp objects. Unroll the boat so it is laid out flat, and locate your pump. 93A Use a hand or foot operated air pump to inflate the boat. Do not use high-pressure air compressors.Adults should inflate the chambers following the numerical sequence marked on the valves.
PAGE 7
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Oar Assembly (Certain Models): 93A 1. Insert “Shaft A” with the pin end first into the blade. Make sure the pin is securely fastened to the blade. 2. Insert the assembled “Shaft A” through the oar-lock with the blade towards outboard (water). 3. Place the retainer ring onto the other end of the assembled “Shaft A”, from inside of the boat. 4.
PAGE 8
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Grab Line Installation: IMPORTANT: To properly install the inflatable boat’s grab line and/or accessory lines, first inflate the boat. If is necessary, begin the grab line installation at the rear of the boat by threading it through the rope holders completely around the outside of the boat. Tie the two loose ends in a square knot at the rear end of the boat.
PAGE 9
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Rules to Observe During Navigation 93A • Be responsible, do not neglect the safety rules, this could jeopardize your life and the lives of others. • Always keep control of your boat. • Respect local regulations and practices. • Near the shore, navigate in the designated boating area. • Remember that weather conditions can rapidly deteriorate. Always be sure that you can reach a shelter rapidly.
PAGE 10
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Disassembly and Storage 93A First clean your boat thoroughly following the Care and Maintenance instructions. Open all air valves and deflate boat completely. Remove all the accessories from the boat; seats, fishing rod holders, oars, gear pouch and battery pouch. Flip the boat over. Fold the left side of the boat over and then fold the right side over the left.
PAGE 11
(93IO) “ISO” BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 4.875” X 7.25” 05/10/2018 Limited Warranty Intex Inflatable Boat 93A Your Intex Inflatable Boat has been manufactured using the highest quality materials and workmanship. All Intex Inflatable Boats have been inspected and found free of defects prior to leaving the factory. This limited warranty applies to the Intex Inflatable Boat only. This limited warranty is in addition to, and not a substitute for, your legal rights and remedies.