Instructions / Assembly

ManualsBrandsInternational Concepts ManualsCarts, Islands & Utility TablesUnfinished Kitchen Cart With Butcher Block Top

ITEM NO : WC-2424

REVISED FEB 04, 2015

Printed in Vietnam

- 1 -

ASSEMBLY INSTRUCTIONS

PLS NOTE: THE BUTHER BLOCK TOP HAS BEEN TREATED WITH SYNTHETIC OIL, WHICH WILL ENHANCE

THE GRAIN OF THE WOOD.

BUT, MOST IMPORTANTLY, THIS TREATMENT WILL ASSIST IN MINIMIZING POTENTIAL CRACKING OF THE

WOOD.

WE STRONGLY RECOMMEND TREATING THE TOP ABOUT EVERY 6 MONTHS, IN ORDER TO MAXIMIZE

THE LIFE OF YOUR ISLAND.

WHEN YOU APPLY OIL, PLS BE SURE THAT THE OIL IS SAFE FOR CONTACT WITH FOOD.

Do not use vegetable or olive oils because they can turn rancid. Food Grade Mineral oil

remains safe throughout its life. There are various oils available for cutting boards and butcher

blocks. Some are called "Butcher Block Finishes" or "Mystery Oil." Save some money by visiting

the local hardware or drug store and purchasing Mineral Oil. (not mineral spirits - this is paint

thinner)

When you see the words "food safe finish" in a description of a wood product, this generally

means mineral oil has been used. Simply wipe mineral oil on the surface of your board and

watch it soak in. When the wood won't take any more oil, you can wipe off the excess with a

clean dry cloth. Don't worry about applying too much oil - more is better.

Description

Item No.

: KITCHEN WORK CENTER WITH CASTERS

: WC-2424

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS PLS NOTE: THE BUTHER BLOCK TOP HAS BEEN TREATED WITH SYNTHETIC OIL, WHICH WILL ENHANCE THE GRAIN OF THE WOOD. BUT, MOST IMPORTANTLY, THIS TREATMENT WILL ASSIST IN MINIMIZING POTENTIAL CRACKING OF THE WOOD. WE STRONGLY RECOMMEND TREATING THE TOP ABOUT EVERY 6 MONTHS, IN ORDER TO MAXIMIZE THE LIFE OF YOUR ISLAND. WHEN YOU APPLY OIL, PLS BE SURE THAT THE OIL IS SAFE FOR CONTACT WITH FOOD. Do not use vegetable or olive oils because they can turn rancid.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PAGE 3
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Top 01 C Shelf 01 Sketch NO Description Qty B Leg (L-R) 04 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Flat washer (8.
PAGE 4
STEP 1 Attach Legs (B) to the Top (A), with washers (1) and (2) and Nut (3). Tighten with the Wrench (4), Then attach the shelf (C ) to the legs with screws (7) and L-Brackets (5) , as shown below. Tighten with a screwdriver.
PAGE 5
STEP 2 Attach Casters (8) and (9) to the bottom of legs (B) by using Screws (6), as shown below. Tighten with the screwdriver.