User's Manual

2
Introduction
INBT02 is a Bluetooth Module. This can be made to connect to other Bluetooth wireless devices by
integrating the INBT02 module to the user’s device for which Bluetooth functionality is targeted.
The module block diagram is shown Figure 1
Figure 1: INBT02 - Block Diagram
It consists of 3 main portions
1. Antenna – Transmit/Receive RF Signal to/from other Bluetooth devices
2. BT Module – BM 180 – Used for Transmit/ Receive data to and from other Bluetooth devices
3. UART Interface – Interface to the external UART host
The BT Module is integrated to the printer by professional Installation, via the FFC which contains the
UART interface to the host CPU, apart from some GPIO lines. It is a 14-pin connector as shown in photo in
Figure 2.
Figure 2: UART Interface - 14 Pin Connector