User's Manual

EasyLAN Wireless User’s Manual
3-10
Using the EasyLAN Wireless Admin Utility
Note:
The password for the EasyLAN Wireless is set to access when the EasyLAN
Wireless is set to factory defaults.
1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless
on your network. For help, see “To search for the EasyLAN Wireless” earlier in this
chapter.
2. Select an EasyLAN Wireless, open the Set Up menu, and select Reset. The Reset
Defaults Password dialog box appears.
3. Enter the password for the EasyLAN Wireless and click OK. A message box
appears telling you that the EasyLAN Wireless is being set to factory defaults.
When the EasyLAN Wireless is set to factory defaults, the Search screen appears.
Printing a Test Label
Use the Web browser interface, the EasyLAN Wireless Admin utility, or the test switch
to print a test label. This section explains how to use the Web browser interface and the
EasyLAN Wireless Admin utility. For help using the test switch, see “Understanding
the EasyLAN Wireless” in Chapter 1.
Using the Web Browser Interface
Note:
The test label is sent to the printer when you click Print Test Label.
1. From the Configuration and Management page, click Print Test Label. A screen
appears telling you that the test label has been sent to the printer. For help opening
the Configuration and Management page, see “To open the Web browser interface”
earlier in this chapter.
2. Click Main to return to the Configuration and Management screen.