User's Manual

OperationChapter —2
22 CV60 Vehicle-Mount Computer User's Manual
External Antenna Connection
The external antenna mounts on the radome assembly" on the top of the
computer. Refer to the illustration below for connection information.
802.11 External
Antenna
Connector
Picolink Antenna
Connector
802.11 Antenna
Connector
Patch Antenna
The 2.4 GHz patch" antenna can be mounted on a wall using either
screws or small patches of adhesive-backed hook and loop fastener material.
Since system performance and antenna polarization are site-dependent, a
permanent mounting location and orientation may require some experĆ
imentation. In most fixed installations the antenna should be mounted iniĆ
tially in a vertically polarized position, with the cable from the antenna parĆ
allel to the floor/ceiling.
Horizontal Polarization
Vertical Polarization
In mobile installations, best performance will be achieved by mounting the
antenna flat, on top of the operator safety cage. Use at least two screws to
hold the antenna in place.