Installation Guide

18 Installation Guide
When the alarm input/output connection is complete, check the
Alarm Configuration menu. Refer to the “TruVision Panoramic
Wi-Fi Wedge IP Camera Configuration Manual” for more
information.
Resolution and viewing angle
The camera provides multiple resolution options, as shown in
Table 1 below. Please select the resolution and frame rate
according to the required horizontal and vertical fields of view.
The multiple resolution options provide you with a lot of
flexibility to position the cameras for seamless video
surveillance coverage. For example, on an outside corner you
could install two cameras on each side of the corner and set the
resolution to 1776
× 1340 for horizontal 270
o
and vertical 6°
to100
o
field of view. You could use only one camera viewing
several shop gates and set the resolution to 2080
× 784.
Note: Before you set the camera resolution, please check the
supported resolution options of your storage recorder or video
management system (VMS). If the selected resolution is not
supported, you may get a black screen or an error on the
recorder and/or VMS.
Table 1: Camera resolution options
Resolution Ratio Horizontal
FOV
Vertical
FOV
Frame
Rate
1280 × 960 4:3 -64
o
to
+64
o
6
o
to100
o
PAL:
25 fps
@50 Hz;
NTSC:
30 fps