Installation Guide

Installation Guide 5
Screws C: M4×8, 2pcs
Tamper-resistant hex
wrench:
Lens alignment tool: Converter pan:
WEEE and battery
disposal instructions:
CAUTION: Use direct plug-in UL listed power supplies marked
Class 2/CE certified or LPS (limited power source) of the
required output rating as listed on the unit.
CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
Cable requirements
For proper operation, adhere to the following cable and power
requirements for the cameras. Category 5 cabling or better is
recommended. All network cabling must be installed according
to applicable codes and regulations.