Manual

44 TruVision Series 3 IP Camera FW3.1 Configuration Manual
Cross line detection
This function can be used to detect people, vehicles and objects crossing a pre-
defined line or an area. The line crossing direction can be set as bi-directional,
for example, from left to right or from right to left. A series of linkage methods can
also be triggered if an object crossing the line is detected.
Figure 11: Cross line menu
To define Cross Line Detection:
1. Click Configuration > Smart Event > Cross Line.
2. Check the Enable Cross Line check box to enable the function.
3. Click Draw Area. A crossing plane appears on the image.
4. Click on the line. Two red squares appear at each end of the line. Drag one of
the red squares to define the arming area.
Select the direction as A<->B, A ->B, or B->A from the drop down menu.
A<->B: Only the arrow on the B side is displayed. When an object crosses
the plane in both directions, it is detected and alarms are triggered.
A->B: Only an object crossing the configured line from the A side to the B
side can be detected.
B->A: Only the object crossing the configured line from the B side to the A
side can be detected.
5. Set the sensitivity [1to 100].