Installation Guide
Table Of Contents
- Introduction
- Installation
- Installation environment
- Package contents
- Cable requirements
- Camera description
- Setting up the camera
- Accessing the SD card
- Mounting the IP fixed lens bullet camera
- Mounting the IP VF lens bullet camera and the IP motorized lens bullet camera (without the supplied back box)
- Mounting the IP VF lens dome camera and IP motorized lens dome camera
- Mounting the IP fixed lens dome camera
- Mounting the IP wedge dome camera
- Mounting the IP turret camera
- Using the camera with a recorder
- Using the camera with TruVision Navigator
- Specifications
- Pin definitions
56 Installation Guide
Specifications
TruVision IP fixed lens bullet cameras
Electrical
Voltage input
12 VDC, PoE (IEEE 802.3af)
Power consumption
Max. 5 W
Miscellaneous
Connectors
DC jack flying lead, RJ45 flying lead
Operating temperature
-30 to +60°C (-22 to +140°F)
Dimensions
60 × 153 mm (2.3 × 6.0 in.)
Weight
373 g (0.82 lb.)
Environmental rating
IP67
TruVision IP VF lens bullet cameras
Electrical
Voltage input
12 VDC, PoE (IEEE 802.3af)
Power consumption
Max. 7.5 W
Miscellaneous
Connectors
DC jack flying lead, RJ45 flying lead
Operating temperature
-30 to +60°C (-22 to +140°F)
Dimensions
105 × 94.7 × 265.4 mm / 4.13 ×
3.74 × 10.4 in. (without back box）
105 × 94.7 × 301.4 mm / 4.13 × 3.74
× 11.86 in. (with back box)