Installation Guide
Table Of Contents
- Introduction
- Installation
- Installation environment
- Package contents
- Cable requirements
- Camera description
- Setting up the camera
- Accessing the SD card
- Mounting the IP fixed lens bullet camera
- Mounting the IP VF lens bullet camera and the IP motorized lens bullet camera (without the supplied back box)
- Mounting the IP VF lens dome camera and IP motorized lens dome camera
- Mounting the IP fixed lens dome camera
- Mounting the IP wedge dome camera
- Mounting the IP turret camera
- Using the camera with a recorder
- Using the camera with TruVision Navigator
- Specifications
- Pin definitions
6 Installation Guide
be used for an extended period of time, put on the lens
cap to protect the sensors from dirt.
Package contents
Check the package and contents for visible damage. If any
components are damaged or missing, do not attempt to use
the unit; contact the supplier immediately. If the unit is
returned, it must be shipped back in its original packaging.
IP fixed lens bullet camera
Camera:
Drill template:
Screws:
Drywall anchor
7.5 × 24.5 mm (3 pcs)
Screw
M4 × 25 mm (3 pcs)
Drill Template
Screw hole All: for integrative bracket