User Manual

ManualsBrandsInterlogix ManualsElectronicsTruVision 32 Channel IP 2U NVR - 6TB

Table Of Contents

Chapter 1 Product introduction
- Product overview
- Default settings to access the device
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel
- RS-232 port
- PoE ports
- Monitor connections
- Rack mounting
Chapter 3 Getting started
- Powering on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Controlling the recorder
- Using the front panel
- Using the mouse
- Using the IR remote control
- Menu overview
Chapter 5 Live view
- Description of live view
- Video output
- Live view mouse menu
- Single and multiview display mode
- Sequencing cameras
- Live view toolbar
- Digital zoom
- PTZ preset and tours
Chapter 6 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Log search
Chapter 7 Playback functionality
- Instant playback
- 24-hour playback
- Event playback
- Smart playback
- Split-screen playback
- Playback speed and skip time
- Play back frame-by-frame
- Digital zoom in playback
- Create bookmarks
- Lock playback files
- Manage playback files
Chapter 8 Archiving files
- Archiving files
- Create and archive video clips
- Playing back archived files on a PC
- Using TruVision Player
Chapter 9 Display settings
- Display settings
- Layout
Chapter 10 Camera setup
- IP camera status
- Using RTSP custom protocols
- PoE power budget (TVN 22S only)
- Camera recording settings
- Snapshots
- Camera OSD
- Image settings
- Motion detection
- Privacy mask
- Camera tamper
- VCA setup
- PTZ presets and tours
- V-stream encoding
- People counting
Chapter 11 Network settings
- Network settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- UPnP settings
- Network status
- Archive network packet data
- Network statistics
- Port forwarding
Chapter 12 Recording
- Recording schedule
- Modify the instant playback duration
- Manual recording
- Hot Spare
- SD card recording
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Alarm response actions
- Set up alarm outputs
- Manual trigger
- Alarm Audio
- Event notifications
- Detect video loss
- Alarm host setup
- OH alarm reporting
- TVRMobile push notifications
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- RS-232 settings
- Using a network storage system
Chapter 15 Storage management
- HDD information
- Storage mode
- Managing eSATA
- S.M.A.R.T. settings
- Bad sector detection
- RAID
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Admin password
Chapter 17 System information
- View system information
- Search the system log
Chapter 18 Using the web browser
- Internet Explorer users
- Access the web browser
- HTTPS settings
- Mac Safari Browser users
- Plug-in installation
- Web browser live view
- Control a PTZ dome camera via the web browser
- Play back recorded video
- Search for event logs
- Recording from the browser
- Configure the recorder via the browser
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C Maximum pre-recording times
Appendix D Default menu settings
Index

Chapter 5: Live View

28 TruVision NVR 22 (S/P) User Manual

To call up a preset tour:

1. In live view, left-click the mouse and select the PTZ control icon in the live view

toolbar. The PTZ control panel appears. Select the desired camera from the toolbar.

– Or –

On the front panel, select the desired camera and press call up the PTZ control

panel.

2. Scroll the control panel to Tour and double-click the desired preset tour from the list.

The camera immediately carries out the preset tour movement.

To call up a shadow tour:

1. In live view, left-click the mouse and select the PTZ Control icon in the live view

toolbar. The PTZ control panel appears. Select the desired camera from the toolbar.

– Or –

On the front panel, select the desired camera and press call up the PTZ control

panel.

2. Scroll the control panel to Shadow Tour and double-click the shadow tour from the

list. The camera immediately carries out the shadow tour movement.