User Manual
Table Of Contents
- Chapter 1 Product introduction
- Chapter 2 Physical installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Live view
- Chapter 6 Searching files
- Chapter 7 Playback functionality
- Chapter 8 Archiving files
- Chapter 9 Display settings
- Chapter 10 Camera setup
- Chapter 11 Network settings
- Chapter 12 Recording
- Chapter 13 Alarm and event setup
- Chapter 14 Device management
- Chapter 15 Storage management
- Chapter 16 User management
- Chapter 17 System information
- Chapter 18 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recording times
- Appendix D Default menu settings
- Index
Chapter 15: Storage management
TruVision NVR 22 (S/P) User Manual 119
6. Type in a name for the array, select the RAID Level, Initialization Type, and the
drives to be included.
7. Click OK and then Initialize to start the process. When the process is complete,
data on the RAID group is displayed.
Note: You can create a RAID array of RAID 0, RAID 1, RAID 5, and RAID 10.
• If you choose RAID 0, at least 2 HDDs must be installed.
• If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
• If you choose RAID 5, at least 3 HDDs must be installed.
• If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.
To verify the RAID:
1. Click Storage Management > HDD Information.