User Manual Manual

Chapter 7: Network settings
TruVision NVR 10 User Manual 49
• NTP Port: Port of the NTP server.
4. Click Apply to save the settings.
5. Click Back to return to live view, or continue configuring the NVR settings.
Email setup
Your NVR can send email notifications of alarms or notifications through the network.
Note: Ensure that the DNS address has been set up correctly beforehand.
To configure email settings:
1. From the menu toolbar, click Network Settings > Email.
2. Enter the required settings.
Option
Description
Enable Server
Authentication
Check the box if your mail server requires authentication and enter the
login user name and password.
SMTP Server
Enter the SMTP server’s IP address.
SMTP Port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL
Check the box to enable SSL if it is required by the SMTP server. This
feature is optional.
Sender
Enter the name of the sender of the email.
Sender’s Address
Enter the sender’s email address.
Select Receiver
Select an email recipient. Up to three receivers can be selected.
Receiver
Name Enter the name of the receiver of the email.
Receiver’s Address
Enter the email address of the receiver.
Enable Attached
Snapshot
Check the Enable Attached Picture box if you want to send an email with
attached alarm images.
Interval
Select an interval range in the Interval box.
The interval range represents the time range between the alarm images
being sent. For example, if you set the interval range at two seconds, the
second alarm image will be sent two seconds after the first alarm image.
The interval times are 2, 3, 4, or 5 seconds. Two seconds is default.
3. Click Test to the test email settings.
Note: We recommend that you test the email settings after entering values in the
email window.
4. Click Apply to save the settings.
5. Click Back to return to live view, or continue configuring the NVR settings.