Assembly Instructions

ASSEMBLY GUIDE
12
6. Programmable Remote Control Operating Instructions
If one or more motors are changed in a system, the control box must be reset to factory settings and a manual
reset has to be performed!
6.8 Lock or unlock the programmable remote control
Follow the instruction below to lock or unlock the programmable remote control.
•
• The display will show “Loc” which means the remote control is now locked.
•
• The display will show the height which means the remote control is now unlocked.
6.9 Reset control unit to factory settings
Follow the instructions below to use a configured control unit on another identical electric height adjustable frame or to reset the control
unit to its original factory settings.
•
•
•
factory settings.
6.6 Changing the desktop height displayed
Follow the instructions below to change the height shown on the display but not the actual position of the desktop.
• Within the setting menu choose “S – 5”.
• Press the “S” button to enter the setup menu.
•
• Press the “S” button to finish the setup.
6.7 Run automatically with memory position.
Follow the instructions below to change the run automatically with memory position function on or off.
• Within the setting menu choose “S – 6”.
• Press the “S” button to enter the setup menu.
•
• Press the “S” button to finish the setup.