Assembly Instructions

Assembly Instructions1-800-645-2986
3
OFFICE PARTITIONS
A
Note: Hardware
to anchor wall
bracket to wall is
not provided.
P1
H13
B
P1
P2
P2
P2
P1
P1
H16
H15
H2
H13
P1
Foam seal may
need to be trimmed
to fit panel.
H1
H14
H13
H13
H19
H18
STEP 4
Insert panel studs.
H1 H13 H18 H19
(2) (6) (1/2)* (2/4)*
STEP 1
Remove feet from panel.
Attach connectors to
top and bottom.
STEP 2
Attach raceway
to bottom of
panels. Add feet
and bottom
bracket.
STEP 3
Attach aluminum
plate(s) to bottom
of raceway.
STEP 6
Fit panel
studs into
bottom
bracket,
then loosely
attach to top
bracket.
STEP 7
Insert panel
filler caps into
panel filler post
top and
bottom. Insert
post into
bottom bracket
first, then into
top bracket.
Then tighten all
bolts firmly.
STEP 1
Remove feet from panel.
Attach connectors to
top and bottom.
STEP 2
Attach raceway
to bottom of
panel. Add feet
and bottom
bracket.
STEP 3
Attach aluminum
plate(s) to bottom
of raceway.
H19
H18
STEP 4
Attach to wall
(2) (10) (2) (2) (1) (2/4)* (4/8)*
H2 H13 H14 H15 H16 H18 H19
STEP 5
Loosely attach top
bolts.
*1 plate, 2 screws per 36" panel. 2 plates, 4 screws per 48" or 60" panel.
Office Partitions With Electric 4/16/10 3:17 PM Page 6