User's Manual

46
Fig. 58: Wireless Router/AP Browser
z The IEEE 802.11b/g stops working and does not respond to Web management
requests.
The firmware of the IEEE 802.11b/g may be stuck in an incorrect state.
Unplug the power connector from the power jack, and then re-plug the connector to
restart the AP.
Contact our technical support representatives to report this problem, so that the bugs
can be static in future firmware versions.
If the IEEE 802.11b/g still does not work after restarting, there may be hardware compo-
nent failures in the AP.
Contact our technical support representatives for repair.