User's Manual

Intercontinental Technologies, Ltd.
Chapter 10 Page 27 of 87
Chapter 10 Function Settings
Industrial Radio Remote Controllers are used in diverse operating environments and have a wide
range of applications and uses. This creates a need for flexibility and control over the setting of the
functions designed into these controllers. Default parameters are set at the factory, but many
functions and parameters can be customized to provide particular operating functions.
This Chapter provides a detailed list of the available functions of the F22 Series and the range of
settings for each. The Technical Sheets in Chapter 14 also include a summary list of parameters and
settings that can be customized to meet your specific needs.
Please note that the F22 Series includes many customizable functions that are set at the factory and
not usually changed. To avoid confusion, only those functions that are typically specified by the
user are listed here. However, if you have a need for a function setting that is not listed, please
contact ITL to determine if that function is available.
10.1 Description
Many of the functions of the F22 Series are set at the factory to meet most user’s requirements, and,
in most cases, no change is required. However, if you have a need that requires changes from the
default setting, your unit can be specially programmed at the factory. The tables below list the
transmitter and receiver functions, default settings, and custom settings available on the F22 Series
Handheld and F22-J Joystick Model Industrial Radio Remote Controllers. Please contact ITL or
your local distributor for more information regarding alternate function settings, or refer to the
Technical Sheets in Chapter 14 of this Manual.
10.2 F22 Series Handheld Transmitter Function Settings
The table below shows the functions available on the handheld F22 Series models, their available
settings, and their default settings. Note: This table lists all functions for the F22 Handheld models
depending on which buttons are available on each specific model number. Refer to the Technical
Sheets in Chapter 14 for a list of functions available by model.
Table 10.2: Handheld Transmitter Functions and Default Settings
Function/Setting Description /Notes Available Settings Default Setting
Enable
Password
Enable or disable the
Password Function
• Enabled
• Disabled
Disabled
Password Password to be entered by
user before operation
• 4 character
password
N/A
UP Button Control button
• Normal,
interlocked
• Normal, not
interlocked
• Toggle (on/off)
• On (off is button
DOWN)
Normal,
interlocked with
button DOWN