1/4" & 1/8" Drill Bits Pencil level Power Drill Mallet Tape Measure Safety Goggles HARDWARE LIST ITEM REFERENCE IMAGE NAME QTY 1 Top Mounting Bracket 1 2 Glass Shelf 2 3 Screw ST4*35 5 4 Wall Anchor 5 Level and mark the cabinet's location on the wall. Connect the wire to Junction Box inside the wall.
Step 2 Fix Top Mounting Bracket on the Wall Measure the distance between the 3 holes in the Top Mounting Bracket.
Step 3 Hanging the Cabinet on the top mounting bracket. Make sure top brackets are locked in the grooves. Step 4 Step 5 Wall Move the cabinet to the right position and screw in the bottom suppor ting bracket and fix it.
Step 6 Insert clear snap in shelf clips into holes on the sides of the cabinet. Install the glass shelf. Adjust the height according to your preference.