User manual

2-7-5 Wi-Fi Protected Setup (WPS)

Wi-Fi Protected Setup (WPS) is the simplest way to build a

connection between wireless network clients and this wireless

router. You don’t have to select an encryption mode or input a long

encryption passphrase every time you need to set up a wireless

client: You only need to press a button on the wireless client and

this wireless router, and the WPS will do the rest for you.

This wireless router supports two types of WPS: Push-Button

Configuration (PBC) and PIN Code. If you want to use PBC, you

need to push a specific button on the wireless client to start WPS

mode, and switch this wireless router to WPS mode, too. You can

push the Reset/WPS button on this wireless router or click “Start

PBC” on the Web configuration interface to do this; if you want to

use PIN Code, you need to know the PIN code of the wireless client

and switch it to WPS mode, then provide the PIN code of the

wireless client you want to connect to this wireless router.

Click Wireless on the left side of the Web management interface,

then click “WPS.” The following message will be displayed on your

Web browser: