User manual

After you finish the WEP settings, click “Apply” (10) and the

following will be displayed on your Web browser:

Click “Continue” to go back and continue with the router setup

procedure, or click “Apply” to reboot the router so the settings will

take effect. (Wait for about 30 seconds while the router reboots.)

2-7-3-3 Wi-Fi Protected Access (WPA)

When you select this mode, the wireless router will use WPA

encryption, and the following setup menu will be shown on your

Web browser:

Below are descriptions of the options:

WPA Unicast Select a type of WPA cipher suite.

Cipher Suite (2): Options are “WPA (TKIP),” “WPA2 (AES)” and

“WPA2 Mixed.” You can select any one of them,

but you have to make sure your wireless client

supports the cipher you select.