User manual
61
2-6-2 DHCP Server
These settings are only available when “DHCP Server” in “LAN IP”
is enabled. Below are descriptions of the options:
Lease Time (1): Choose a lease time (the duration that every
c
omputer can keep a specific IP address) of
every IP address assigned by this router from
the drop-down menu.
Start IP (2): Enter the start IP address of the IP range.
End IP (3): Enter the end IP address of the IP range.
Domain Name (4): If you wish, you can also optionally input the
domain name for your network.
Recommended values if you don’t know what to enter:
Lease Time: Two Weeks (or “Forever” if you have fewer than 20 computers)
Start IP: 192.168.2.100
End IP: 192.168.2.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field (the “d” field) of “End IP” must be
greater than “Start IP” and can’t be the same as the router’s IP
address.
2. The first three fields of the IP address of “Start IP,” “End IP” and
“IP Address” of “LAN IP” (“a,” “b” and “c”) should be the same.
3. These settings will affect wireless clients, too.
1
3
4
2