User manual
53
Below are descriptions of each option:
User Name (1): Enter the user name assigned by your Internet
service provider here.
Password (2): Enter the password assigned by your Internet
service provider here.
L2TP Gateway (3): Enter the IP address of the PPTP gateway
assigned by your Internet service provider here.
MTU (4): Enter the MTU value of your network
connection here. If you don’t know it, you can
use the default value.
Connection Select the connection type of the Internet
type (5): connection you want to use. (Refer to the last
section for detailed descriptions.)
Idle Time Out (6): Enter the idle time out of the Internet
connection you want to use. (Refer to the last
section for detailed descriptions.)
When you finish the settings, click “Apply” (7) and the following
message will be displayed on your Web browser:
Click “Continue” to go back and continue with the router setup
procedure, or click “Apply” to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router is
rebooting.)