Service Guide

Hardware Installations and Upgrades
30 Intel
®
Server System SC5650HCBRP Service Guide
Removing and Installing the Right Side Cover
WARNING
This system chassis must be operated with the Right side cover installed to ensure
proper cooling.
Removing the Right Side Cover
1. Observe the safety and ESD precautions listed in“Appendix B: Safety Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
4. If it is installed, remove the front bezel assembly. For instructions, see “Removing the Front Bezel
Assembly”.
5. Remove the two screws (see letter “A” in the following figure”) securing the right side cover to the
chassis. Lift the right side cover off the chassis.
Figure 21. Removing Right Side Cover
Installing the Right Side Cover
1. Observe the safety and ESD precautions listed in “Appendix B: Safety Information”.
2. Reinstall the right side cover. Reinstall the two screws.
3. Reinstall the front bezel assembly. For instructions, see “Installing the Front Bezel Assembly”.
4. Reinstall the left side cover. For instructions, see “Installing the Left Side Cover”
5. Reconnect all peripheral devices and the AC power cable. Power up the server.