Service Guide

System Utilities
Intel® Server System SC5650HCBRP Service Guide 27
Figure 18. CMOS Clear Jumper
1. Power down the server and unplug the AC power cord.
2. Open the server chassis.
3. Move the jumper (J1E6) from the default operating position (covering pins 1 and 2) to the reset/clear
position (covering pins 2 and 3).
4. Wait for 5 - 10 seconds.
5. Move the jumper back to default position, covering pins 1 and 2.
6. Close the server chassis and reconnect the AC power cord.
7. Power up the server.
The CMOS is now cleared and you can reset it by going into the BIOS setup.