Server WHQL Testing Services Enterprise Platforms and Services Division Intel® Server Board S5000VSASATAR Server Test Submission (STS) Report For the Microsoft® Windows® Logo Program (WLP) Rev 2.1 May 5, 2008 This report describes the Intel® S5000VSASATAR Server Platform Windows* Logo Program test run conducted by Intel Enterprise Platforms and Services Division (EPSD).
0BRevision History and Disclaimers S5000VSASATAR Revision History and Disclaimers Revision History Revision Date Comments 1.0 11/1/2007 Internal draft of the STS Report for Windows Server 2003 Submission for Intel® Server Board S5000VSASATAR. (32-bit and 64-bit) 2.0 4/18/2008 Internal draft of the STS Report for Windows Server 2008 x64 (with Windows Server 2008 x86 “Supported”) Submission for Intel® Server Board S5000VSASATAR. 2.
S5000VSASATAR Contents Contents Revision History and Disclaimers ..................................................................... 2 Introduction ......................................................................................................... 4 Overview of Contents.............................................................................................................. 4 Terms and Definitions .................................................................................................
1BIntroduction S5000VSASATAR Introduction This report provides an overview of the testing conducted on the Intel® Server Board S5000VSASATAR by Intel EPSD and provides details about this testing run. Overview of Contents Section Content Introduction Brief descriptions of the sections in the report. Table listing terms and definitions.
S5000VSASATAR 2BServer Board Submission Information Server Board Submission Information Intel Server Board Submission Report: Completion of WLP Data in this section reflects system submission information at the time of WLP Update submission.
2BServer Board Submission Information S5000VSASATAR Server Board Configuration Information Processor Quantity 2 (physical processors installed) Front Side Bus Speed 1333 MHz Family/Model Intel Xeon Quad-core and Dual-Core processors Speed 2.67, 2.80, 3.0, 3.16, 3.20, and 3.
S5000VSASATAR 2BServer Board Submission Information Bus Types Check all that Apply 5 PS/2 Check all that Apply AGP* 1394 PCCard* (16-bit) CF (Compact Flash) CardBus* (32-bit) 5 PCI USB Mini-PCI USB 2.
2BServer Board Submission Information Display ATI* ES1000 SVGA PCI video controller with 16 MB of video memory S5000VSASATAR Windows Server 2008 – 64-bit 8.240.50.3000 8.240.50.3000 Intel® ESG-SHV backplane Windows Server 2008 – 32-bit 6.0.6001.18000 (Null driver) Windows Server 2008 – 64-bit 6.0.6001.18000 Windows Server 2008 – 32-bit Product Data for HCL: Completion of WLP Data in this section reflects product data for HCL at time of WLP submission.
S5000VSASATAR 3BHardware Compatibility Tests Used Hardware Compatibility Tests Used Microsoft* Windows Hardware Driver Central Server Testing Home Page: http://www.microsoft.com/whdc/winlogo/wlk/default.mspx Please check this website regularly for test kit updates. Operating Systems Notes Hardware Compatibility Tests (HCT) Windows Server 2008 DTM 1.2 Test Procedures and Readme files for Windows XP SP2, Windows vista, Windows Server 2003, and Windows Server 2008 (4.95MB) DTM 1.
4BErrata and Contingencies S5000VSASATAR Errata and Contingencies Microsoft* System DTM Errata list is available at: https://winqual.microsoft.
S5000VSASATAR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only . Assertion 6B0F606E-DBB3-4B8C-887932B302412EB8 SSID register of the Subsystem ID and Subsystem Vendor ID Capability table must be read-only .
4BErrata and Contingencies S5000VSASATAR Additional information (for example, test system in a multiple system configuration) Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
S5000VSASATAR 4BErrata and Contingencies Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.
4BErrata and Contingencies S5000VSASATAR Failure type (Contingency, Errata, Incident) ID number (Windows XP, Windows 2000, etc.) Windows Server 2008 x86 Errata 566 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Assertion 7A5587BC-5646-4DC4-9A5D-22F85AB2204E: FAILED. PCI Express ports and bridges must implement Subsystem ID and Subsystem Vendor ID Capability.
S5000VSASATAR 4BErrata and Contingencies Windows Server 2008 x86 Errata 474 Failing test name PCI Hardware Compliance Test Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined.
4BErrata and Contingencies S5000VSASATAR Failing test name PCI Harware Compliance Test for Systems Running Windows Vista (PCIHCT) Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) Bit 10 (Interrupt Disable) in the Command register (offset 4h) in the Header table must be read-writable if the device supports an interrupt.
S5000VSASATAR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies PCI Compliance - Bit 3 (Read Completion Boundary) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0 for switch ports.
4BErrata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) S5000VSASATAR According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined. Bit 13 in the same register (Link Status) can be used to determine if the link is active (up).
S5000VSASATAR Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) 4BErrata and Contingencies The Bit 5 (Surprise Down Error Severity) in the Uncorrectable Error Severity register (offset Ch) in the Advanced Error Reporting Capability table must be read-only and always return 1 if the Bit 5 (Surprise Down Error Mask) in the Uncorrectable Error Mask Register in the Advanced Errror Reporting Capability table is not implemented Additional information
4BErrata and Contingencies Applicable error message (Type N/A if the error message or failing text is excessive or if there is no text) S5000VSASATAR According to the PCI Express Base Specification, Rev 2.0 Section 7.8.8, this bit field is undefined when the link is not up. If there is not PCIe device behind the bridge, then the link can NOT be up and therefore the field is undefined. Bit 13 in the same register (Link Status) can be used to determine if the link is active (up).
S5000VSASATAR 5BAppendix A – Submission History Appendix A – Submission History ® Microsoft “Designed for Windows*” logo submission history for the Intel Server S5000VSASATAR: Submission ID Type Date OS Qualified Processor Speeds Board Revision BIOS Version 1269022 First-Time 10/30/07 Windows 2003 EE SP2 - 32 & 64 Bit 2.67, 2.80, 3.0, 3.20, and 3.73 GHz 100 S5000.86B.10.00.84 Windows Server 2008 family (64 bit) 2.67, 2.80, 3.0, 3.16, 3.20, and 3.