RAID Simulator Tool Documentation Guide

Intel RAID BIOS Simulator Documentation
Step 3 – Choose an available disk and press <Enter> key to initiate the rebuild, or press <ESC> key to
cancel a rebuild and leave the RAID volume in degrade status. The following screenshots show the RAID
volume in rebuild or degrade status.
Step 2 – When confirmed, press <Y> to go resetting this disk to Non-RAID mode. After this, if system
detects both a Degraded volume and disk available for rebuilding, a Degraded Volume Detected window
will pop up, asking for selecting a disk to initiate a rebuild.