User's Manual

Connecting to a Network using Intel(R) PROSet/Wireless
Back to Contents
Connecting to a Network: Intel(R) PRO/Wireless 2915ABG Network
Connection User Guide
● Connecting to a wireless network
● Connect to a wireless network without security
● Connect to a wireless network with WEP security
● Connect to a wireless network using a profile
● Scan for available networks
● Configure a Linksys (EOU) Access Point
● Intel(R) PROSet/Wireless Configuration Service
Connecting to a wireless network
You can connect to a wireless network using any one of the following ways.
● Automatic Connection: Automatically connect to an available network using an existing profile as specified in the order of the Profiles List.
● Activate Profile: Select a profile from the Profiles List and click Connect. If a connection is made, a balloon prompt is displayed at the task
tray.
● Manually Connect: Select a network from the list of available networks and click Configure to launch the Profile Wizard. You can then create
a profile.
Connect to a wireless network without security
To connect to a wireless network without security:
1. Click Refresh. The available wireless networks display in the Available network list.
NOTE:
If
your wireless adapter receives a blank network name (SSID) from a stealth access point, both the blank SSID and <no profile> display
in the Available networks list. After connection both the blank SSID and the associated SSID display in the Available networks list and the
Profiles List.
file:///C|/CX2%20Muroc%20UG/6-15-04/connect.htm (1 of 9) [6/15/2004 3:40:13 PM]