User's Manual




RevisionHistory
Rev. 1.2 ,Feb.2015 8/44
HardwareUser
Guide ,DocumentNumber:N/A
2 SoftwareFramework

2.1 DriverInstallation
2.1.1 GeneralConsiderations
ThetwodifferenttestanddebugconfigurationsalwaysrequireaWinPCwhereuptofivedifferent
driversmustbeinstalledaccurately.
Thisare:
1. theIntelHighSpeedModemDriver(ecm200),
2. theComneonHighSpeedModemDriver,
3. theProlificserialtoUSBdriver(partoftheflashtool
folder),
4. theFlashUSBdriver(partoftheflashtoolfolder)and
5. theFTDIdiver.
Figure1.LocationoftheProlificserialtoUSBdriver,theFlashUSBdriverandtheFTDIdiver
withintheflashtoolfolder.
Pls note that Win does not always complain if the drivers 4 to 5 are not installed. If one of these
drivers is missing flashing problems are occurring.
TheARMsoftwareandLTEfirmwarereleasesarelinkedtoindividualdriverrevisionnumbersthat
wereusedforreleasetesting.Theywer etypicallypublishedtogetherwiththeARMsoftwareandthe
LTEfirmwarehere: